Home > Flight Controllers >

PixRacer V1

Alternative Views:

Our Price: $99.00

Quantity in Stock:48
Availability: Usually Ships in 2 to 3 Days
Product Code: XR-V1


Power Supply:


If we are out of stock? Consider this alternate US manufacturer: mRobotics

XRacer V1 specifications:

MCU - STM32F427VIT6 rev.3

FRAM - FM25V02-G

Ultra low noise LDOs for sensors and FMU

MPU9250 (9DOF), HMC5983 (Magnetometer), ICM20608 (6DOF), MS5611 (Barometric Pressure Sensor)

Connectors - GPS+I2C, RC-IN, PPM-IN, RSSI, SBus-IN, Spektrum-IN, USART3 ( TxD, RxD, CTS, RTS ), USART2 ( TxD, RxD, CTS, RTS ), FRSky-IN, FRSky-OUT, CAN, USART8 ( TxD, RxD ), ESP8266 ( full set ), SERVO1-SERVO6, USART7 ( TxD, RxD ), JTAG ( SWDIO, SWCLK ), POWER-BRICK ( VDD, Voltage, Current, GND ), BUZZER-LED_BUTTON

MicroSD card reader


Micro USB

ESP-01 802.11bgn Flashed with MavESP8266 and Tested

Dimensions - 36 x 36mm with 30.5 x 30.5mm hole grid with 3.2mm holes

Weight - 10.54g (.37 oz)

10 Included Cables:

  • JST GH series connectors for easy and robust peripheral connections
  • 2 Power Cables (GH 6pin <-> GH 6pin) - 150mm and (25 or 50)mm
  • GPS cable (GH 6pin <-> DF13 6pin + DF13 4pin) - 3D Robotics uBlox 5 GPS + I2C Compass - 150mm
  • GPS cable (GH 6pin <-> SH 6pin) - Ready to Fly Quad uBlox m8 GPS - 150mm
  • Buzzer and Safety Switch (GH 5pin) - 150mm
  • Telemetry1 Cable (GH 6pin <-> 6x2.54mm females) - 150mm
  • Telemetry2/OSD Cable (GH 6pin <-> 6x2.54mm females) - 150mm
  • CAN Cable (GH 4pin <-> GH 4pin) - 150mm
  • PPM / SBus Input Cable (GH 4pin <-> 3pin Servo connector + 1x2.54mm female for RSSI) - 150mm
  • Spektrum Satellite Input Cable (GH 4pin <-> 3pin Spektrum Satellite Connector) - 150mm

Power supply requirements - 5-5.5VDC from USB or PowerBrick connector.

Optional ACSP4 ( 36 x 36mm power distribution, current, voltage sensor with 5V/2.5A ultra low noise buck and 12V/2A ultra low noise buck ) or micro sized ACSP5 companion.

Schematic and Open Source Design Files